Видео

Thanks a lot for this videos series. I get my first FC (Speedybee f405 wings mini) because I found your videos!! I am still setting up on ZOHD Drift. Maiden fly will be soon!!

Thanks a lot, you helping me. I'm flying drone freestyle without googles. I'm monitor person. You can see my video's. I'm planning to change to digital with ground station & monitor. Thanks a lot, i don't have tonne of money to get expensive digital setup (ground station). I will started survey with my budget this digital system.

Typical western brainwashed person. No sunshine? Putin stole the sun.

What....no actual review....No one has covered the regenerative discharge feature of this...I think ToolKitRC still calls it "Recycle". Been so curious if this 2 channel version of the M8P can regen discharge from channel 1 to channel 2 or if it is only from the input to an output channel....In a way this is the one thing that ToolKitRC does better than Junsi. With iChargers you cannot put a load on the output (power resistor/light bulbs) because an iCharger must be powered through the input port. If this thing allowed regenerative discharging from channel to channel AND input to output including external discharging from input to output with power resistors.

Damn even with a 60A input current limit at 25V (2 HP DPS server power supplies in series is 25.2V without a load and 24.6V under fairly heavy load for me) is only 1500W...So if you really wanted to get the full 1600W you'd have to 3 or 4 power supplies in series....but the 49V input limit means you are going to be cutting it very close with 4 in series unless you adjust them to be 12.1V or 12.2V when not under load. While under load they should drop to 46V....47V if you're only using maybe 800W. I guess 36V should be sufficient....That's just shy of 45A at 1600W and I'd be comfortable running an XT90 at that...not so much an XT60. Unfortunately that means your standard 4mm banana plug is going to be out of the question...I've never seen one rated above 32A.

Silly question , Why did they change the way electric motors are rated ? Not sure if anyone can help me figured it out. In the past - electric motor was rated for example - 750 W at 12 Volts at 6000 rpm. So it was very clear information. Now we have the Kv and turns. Very confusing . Same like with the batteries - 120 Amp/h. Versus 70 Amp/ h. Now we have 660 cc. Which doesn’t tell me anything about the capacity of the given battery.

Can we get an update now that the lynch pin works and there are many of them? Thank you

Its going to take a little novel thinking to make this work...i bet AI can figure it out, when the sensors and motors are linked and controlled properly this will be a terrible weapon.

You can disable whatever voice commands you want. Just attach the SD card that's in the back of the charger to your PC and then rename (or delete) the alerts you don't want to hear. My biggest frustration is you're limited to 10 profiles. It would be nice if you could color code them or add icons o something as they all look nearly identical. The discharge rate is very bad though. I believe it's 3A across both channels which isn't much considering how powerful it can charge batteries.

Can I use this method with my Vtol? How will be work in this case?

<3

Of course when you fully stop one more than the other, they get wildly out of sync. I'm curious to see this done with propellors installed. They'd provide flywheel effect and the same amount of drag.

Will they sell escs without any software? I am already using bluejay for quite some time now. I dont care about blheli.

pootin is a cancer of this planet

hello, can I use latest inav with older FC?

youtubers nowadays sell products, they don't review them. You're selling, not reviewing.

I am new to drones etc and have decided to go Bluejay and inav from the start. I don’t want to get confused by trying to learn Betaflight and then swap. I can see that inav is the future for multi-rotors. Well done to everyone who is developing inav. I am very much looking forward to inav 8.

I thought about doing this with the moonlight

Have you toed this now it’s summer? 😊

How about we just call for peace and end the fucking conflict before theres nuclear Armageddon. Btw Putin didnt start the conflict, the United States did by helping overthrow the Ukrainian govt and installed their puppet Zelensky in 2014. Then he (Zekensky) ordered his battalions to start attacking the Eastern Russian provinces of Ukraine. Zelensky along with US State department started the conflict.

I just did this and I did not have to do the CLI command. DJI assistant upgraded just fine. WTFOS must have added the ADB removal to the automated removal process.

Blame all the asshats who thought it was a god idea to support fpv as a tool of war.

ELRS failed after couple of month. FC is still working, if external receiver is connected.

You can replace elrs module to 4in1 easly or but external 4in1 module.

same background on my phone :) maybe same phone ^^ Multiplex 'BID' charger adds a small i2c eeprom to each battery storing the parameters (cell-type, cell-count, low- and high-voltage per cell, an amp for charging/discharging, charging count, day of first use, even plus/minus 0,01 to 0,03 v to adjust min-/max-voltage for cell-type). The chargers use information in this eeprom for charging/discarging.

Looks like an interesting upgrade of the M9. I was considering getting that, but got the HOTA F6 instead (and sort of regretted that ever since as the interface is a pig / laggy to use). The M9 audio prompts could be customised, so you may be able to delete the audio prompts you don't want to get on the M8D... alternately, it seems like the there are individual volumes for operation, warning and broadcast - broadcast most likely being the voice prompts given the language used the describe the M9 voice capabilities. It's nice to see touch in conjunction with hard keys... gives the best of both worlds... but the UI could certainly be better... I mean... why a 30A guage on screen when you set a 1A charge limit. It would be nice also if it alternated between cell and overall charge status automatically (or had option for that) so didn't even need to press button / use roller for that - i.e. do away with "info" button. If the profile layout was more like how the M6 did it it would be a lot more usable... i.e. the flow would be battery profile selection -> show editable settings (rather than overview) -> start... but hopefully they will refine this with firmware updates (rather than a new model).

does the stack support speedybee f405 v3 . rpm filtering?

Thank you 👍

I started buying extras a little while ago. I've got an St Link on the way. If I have to I'll program it to AM32. Putin sent me a "I'm a stupid little whore princess." Me so sorry note. He still loves America, he just gets too emotional when he has to say it and has been rumored that he pees a little every time he thinks a out how America makes his heart flutter.

Why not just build one instead of just talking.

Dobra robota! Oby tak dalej 😀

Super. Prosimy więcej takich filmów 😀

Super. Prosimy o więcej takich filmów 💪💪💪

Fantastic review, Pawel! Thanks! 😃 Stay safe there with your family! 🖖😊

cool, mine is on the way. I plan to connect it to two HP 460W server psu (38A 24v)

I want to build a heavy lift drone. Should I use INAV or ardupilot?

Might as well get two M9 for that price.

Toasty

Very good. Now please spread the word that 8S is the new 6S. Also please build 5 inch 8S. Thank you!

ha, I owned the old Connex HD video system. It was pretty bad, required a clunky ground station. DJi coming out 4 years was a revelation. Such a big leap in video quality. I am still using DJI v1 system and happy enough with it, though there are problems with their app updating my DJi components. I'd like to move to Walksnail some day.

Hi, i just flashed INAV and flies great! how can i get POSHOLD to work without magnetometer? Never been setup with one before

Hej Pawle! Jakiś czas temu przypomniałem sobie moje hobby z dzieciństwa (modelarstwo) i postanowiłem, że do tego wrócę, a że w międzyczasie z zupełnie innych powodów kupiłem mini frezarkę cnc oraz drukarkę 3d, postanowiłem wznieść to na wyższy poziom i zacząć robić modele / drony z pianki XPS. Trochę czytałem, oglądałem (Twój kanał także), wiem, że są uniwersalne kontrolery lotu takie jak Ardupilot np., ale zastanawia mnie jakie radio kupić na początek, żeby było dobre na przyszłość, a żeby nie rozbić banku? Czasami dostaję jakieś powiadomienia z banggood (nawet dzisiaj mi przyszedł newsletter z propozycją Radiomaster TX16 i Jumper T15 - ten pierwszy nawet w promocji kosztuje sporo, ale do zniesienia, ten drugi ma rozsądniejszą cenę) i zastanawia mnie co byś mógł polecić, żeby nie musieć np. za rok kupować nowego kontrolera. Dodam, że mam w planie budowanie nie tylko samolotów czy latadeł, ale myślałem też nad innymi pojazdami. Może mógłbyś zrobić (lub zrobiłeś?) film o radiach, które polecasz? Pozdrawiam! Jacek

cam tilt not right, right?

Was looking into "Tangential Flight", top result lynchpins site and your video. Site looks like scam, only 3D rendered drones ... and then I saw it's from Terrence Howard, so it's bs.

Hello; At first thanks for inforations, i wanr to ask about the best receiver module, because i want create videophone for 38 houses.

now that there isnt a debug mode = 'gyro', which mode should we use for this? The closest is either the acc or dyn_gyro_lpf.

Any ESC firmware & hardware will fly a drone allowing anyone & any government to gather intelligence & to deliver munitions. I'm not sure how this prevents Russia or Ukraine from doing anything with drones that require ESCs. I also assume that any government, including Russia, has enough knowledge & resources to get the BLHeli32 source code or to write their own firmware & put it on ESCs if they really need to do that. I doubt they are playing around with ESC firmware anyway.

Do you miss the cycle functionality? To charge and discharge a battery multiple times?

Glad this video exists, I was totally going to try this. LOL

Hi Pawel. Just trying to find your wrap up and whether the issue was the ESC it motor. What was the cause?